[Links nur für Registrierte]
Unread postby frisco » Sat Nov 16, 2013 11:29 am
Here we go Ladies & Gentlemen !!!
This is the new baby born by Gille's inventiveness: the 4D Hybrid APV !!!
Still in the prototype stage, but we do have a testing unit ready since yesterday and Gille is chain vaping it
The 4D is a genesis hybrid for 18350/18490 AW IMR batteries with very small dimensions.
The tube is 22mm while the tank is 20mm, it is equipped by a threaded fire switch lock and battery fine tuning pin (naval brass).
The prototype tank in the pictures is stainless steel, but the production tank will be pyrex glass .... We will offer the stainless steel tank as an accessory; tank capacity is 2.5 ml.
The mesh hole is 3mm in diameter and the larger than standard stainless steel nuts on the positive stainless steel center pin will zero the gap from the mesh and wire.... The refill hole is 1.5mm.
We have worked on an even more reduced chamber: if you have appreciated the 360° RBA flavor production, you'll be stunned by the 4D performance !!!
As far as the air hole is concerned, we are thinking about giving free options: small (1mm), medium (1.2/1.3mm) and large (1.4/1.6mm).
The finish on the stainless steel body will be "multiline": you may be able to guess it from the low res pics, but it will be clear as soon as we will publish high res pics; just to give you and idea it's similar to the i-Hybrid.
There we go with low res picture gallery:
_______________________________________________________________________________________________________________________________
Jetzt geht´s rund, sagte der Spatz und flog in den Ventilator.
Jetzt geht´s rund, sagte der Spatz und flog in den Ventilator.