[Links nur für Registrierte]
360° is a “genesis” style re-buildable atomiser that can be used in different configurations:
• Single coil
• Single coil with U shaped mesh
• Dual coil
Stainless steel body, 3ml pyrex tank, 1mm air intake hole.
The cap has a pre-drilled hole lined up with the second mesh hole: this hole can be easily opened to boost dual coil setup.
The cap inner chamber has a reduced volume in order to improve flavour tasting.
Positive contact pin in marine grade brass, positive pin fastening with threaded inserts.
Mesh holes are set at 2.5mm, diameter which proved to be the most adequate during intensive testing; the hole for the second mesh has a cap for single coil setup.
E-liquid filling hole is 1.5mm in diameter.
Dimensions:
• Diameter: 22mm
• Height: 50mm (64mm with drip tip)
• Weight: 63gr
The current version has been developed from the first prototype, after one month of intensive testing.
I would like to thank @b-effe and @Jhojho for the dedicated testing sessions and their precious fine tuning setup tips of the 360°.
360° will be available in polished and brushed finish, to ideally match-up with the Atomo, at a retail price of € 99,00 (excluding shipment charges).
In the next few days @frisco will post an interest list; shipments should start by the end of September.
360° is a “genesis” style re-buildable atomiser that can be used in different configurations:
• Single coil
• Single coil with U shaped mesh
• Dual coil
Stainless steel body, 3ml pyrex tank, 1mm air intake hole.
The cap has a pre-drilled hole lined up with the second mesh hole: this hole can be easily opened to boost dual coil setup.
The cap inner chamber has a reduced volume in order to improve flavour tasting.
Positive contact pin in marine grade brass, positive pin fastening with threaded inserts.
Mesh holes are set at 2.5mm, diameter which proved to be the most adequate during intensive testing; the hole for the second mesh has a cap for single coil setup.
E-liquid filling hole is 1.5mm in diameter.
Dimensions:
• Diameter: 22mm
• Height: 50mm (64mm with drip tip)
• Weight: 63gr
The current version has been developed from the first prototype, after one month of intensive testing.
I would like to thank @b-effe and @Jhojho for the dedicated testing sessions and their precious fine tuning setup tips of the 360°.
360° will be available in polished and brushed finish, to ideally match-up with the Atomo, at a retail price of € 99,00 (excluding shipment charges).
In the next few days @frisco will post an interest list; shipments should start by the end of September.
_______________________________________________________________________________________________________________________________
Jetzt geht´s rund, sagte der Spatz und flog in den Ventilator.
Jetzt geht´s rund, sagte der Spatz und flog in den Ventilator.