Oh - die Idee wurde doch eigentlich hier geboren - BF aus Akku-Box... wer war das nochmal? Provision verlangen
After a long wait on parts, finally it is here in finished form
Final testing of the last amendments is complete and all looks good
I have added a clip on cover for the switch making it more comfortable and reducing the impact of any heat build up on the switch contact. I will supply 2 with each mod and these will be available as a spare part-more colours coming
I have upgraded the tubing on the standard 8.5ml super soft bottles, the Squonk¹ now uses 5mm x 2.3mm tube which is much stiffer and easier to fit into the mod especially with a little bit of use.
I have switched the bottles over to modmaker super soft as these are a little bit softer and seal up better to the caps.
Final specs:
Dimensions 78x47x28mm
3D Printed Body- more different colours are on the way
FDV V4 Ultimate anti-spin BF 510
Mod Maker bottle- custom 5mm tubing fitted for Squonk¹
Gold Plate banana connectors
Copper Switch tab
3D Printed switch covers- 2 included with each mod. These are a consumable item and will be available as an accessory/spare.
N52 powerful magnets.
Price £70 + P&P
I will be adding more colours for the body and switch covers over the coming weeks.
The Squonk¹ is fixed on battery length and so some long batteries will leave a large gap(but still work fine!) in which case I would recommend using shorter batteries, I recommend using 25Rs or VTCs as they tend to sit best but batteries do vary quite a bit so try a couple!
As soon as I have a batch ready to go in the shop I will post up in the group with a bit of warning. Now everything is finalised I am building up a stock of parts almost everything is ready, so I am expecting the next batch will be ready/built in 2-3weeks and I will try to have some ready every 1-2weeks after that.
I will be adding a DIY kit option to the webshop and spares/parts over the next few weeks as soon as I have built some stock up
After a long wait on parts, finally it is here in finished form
Final testing of the last amendments is complete and all looks good
I have added a clip on cover for the switch making it more comfortable and reducing the impact of any heat build up on the switch contact. I will supply 2 with each mod and these will be available as a spare part-more colours coming
I have upgraded the tubing on the standard 8.5ml super soft bottles, the Squonk¹ now uses 5mm x 2.3mm tube which is much stiffer and easier to fit into the mod especially with a little bit of use.
I have switched the bottles over to modmaker super soft as these are a little bit softer and seal up better to the caps.
Final specs:
Dimensions 78x47x28mm
3D Printed Body- more different colours are on the way
FDV V4 Ultimate anti-spin BF 510
Mod Maker bottle- custom 5mm tubing fitted for Squonk¹
Gold Plate banana connectors
Copper Switch tab
3D Printed switch covers- 2 included with each mod. These are a consumable item and will be available as an accessory/spare.
N52 powerful magnets.
Price £70 + P&P
I will be adding more colours for the body and switch covers over the coming weeks.
The Squonk¹ is fixed on battery length and so some long batteries will leave a large gap(but still work fine!) in which case I would recommend using shorter batteries, I recommend using 25Rs or VTCs as they tend to sit best but batteries do vary quite a bit so try a couple!
As soon as I have a batch ready to go in the shop I will post up in the group with a bit of warning. Now everything is finalised I am building up a stock of parts almost everything is ready, so I am expecting the next batch will be ready/built in 2-3weeks and I will try to have some ready every 1-2weeks after that.
I will be adding a DIY kit option to the webshop and spares/parts over the next few weeks as soon as I have built some stock up
[Links nur für Registrierte]