The ProMec by G&G LAB.

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • The ProMec by G&G LAB.

      The PROMEC Italy is made with the highest quality materials.

      For the body and the cap 510 has been used steel (AISI 316L) with brushed finish.

      The central contact pin, adjustable in the battery body, are made of naval brass with anti-oxidation and shaping, rendondoli lasting in time and improve the adjustment.

      The body Bottom Feeder, the tank cap and button Squonk are based material steel (AISI 316L), the center pin, perforated pan, is realizate brass food (510CV) and is equipped with a contact fixflex, hard copper, to never lose the positive contact between the pan and the body, so getting the most in terms of conductivity.
      The adjustment screw is made of naval brass with shaping to allow easy adjustment with each type of battery 14500.
      *
      The threads with step 5, are designed to obtain a mechanical strength durable wear.
      The insulators are made of delrin high heat resistance and mechanical flexibility.
      *
      The engravings laser placed on the body and on the fire button bearing the product name, serial number and progressive manufacturer's logo.
      *
      Measures PROMEC Italy Full
      * Height: 130 mm
      Diameter: 17 mm
      Weight: 73 g
      *
      Measures Pro Mec Italy (only mechanical)
      Height: 76 mm
      Diameter: 17 mm
      Weight: 45 g
      *
      Measures PROMEC Italy (only Bottom Feeder)
      Height: 54 mm
      Diameter: 17 mm
      Weight: 40 g
      *
      PROMEC Italy "Italian Product Engineering"

      *
      Our products are built with high quality materials and certificates.
      This is why the choice of produce in limited and numbered.





      [Links nur für Registrierte]
      € 109,90



    • Hallo Leute,

      habe mir das Teil kommen lassen. Geliefert wurde es mit einem neuen 14500er Akku und einem zusätzlichen 510 Connector, falls man nur den Akkuträger benutzen will.

      Die Verarbeitung der Gewinde ist sauber und leichtgängig. Die Zierdrucke auf dem Mod helfen auch, in die richtigen Positionen zu schrauben. Das entnehmen und bestücken der Flasche ist einfach und gut zu händeln.
      Grundsätzlich funktioniert alles sehr selbst erklärend. Beim Taster unten ist ein Lockring verbaut um die Taste bei Bedarf zu sperren.

      Nach einigen Tagen testen, empfinde ich die Akkulaufzeit als überraschend lang. Das könnte daran liegen, dass der Mod kaum nachfeuert. Das Feeden gestaltet sich etwas anderes als mit Flaschedrücken, hier muss der Button lang gedrückt werden und ist etwas hart zu betätigen. Der Coil wird aber gut beflutet und fast bis zum Grund der Flasche geleert.

      Schlussendlich muss ich sagen, dass mir der Mod gefällt und immer öfter zur Tube greife; das liegt nicht zuletzt am Nutz 14.5 Atty der wirklich gelungen ist (und gut auf die Röhre passt). Die Länge stört mich nicht, da es ja keine Box ist.
      Doch sehet selbst:

      Hier der Grössenunterschied zu ein E7




      Der Mod auseinandergenommen




      So kommt dann das Fläschchen rein





      Mit einem Graal obendrauf




      Handcheck




      Der Nutz sieht wirklich passend darauf aus:

      [Links nur für Registrierte]