304L stainless steel mod, with a choice of 22 or 23 mm diameter.
On the top side, the central divisible and movable pin is made of pure copper for maximum conductivity and is coated with appropriate materials in order to avoid the usual black spots at the contact points and the need for frequent cleaning. In particular, the pin’s upper side has been coated with rhodium (rhodium being four times harder than gold and with relatively good conductivity) to afford better resistance to wear from friction due to screwing the atomizer, while the bottom side of the pin is gold plated for maximum conductivity. Finally, it is made so that it allows easy movement to allow for plenty of “clean” contact spots until then next time it is cleaned.
The movable central pin, in conjunction with the vertical movement of the endless screw, will close the circuit providing electrical current for almost any battery/atomizer combination, doing away with the need for tedious micro-adjustments.
The horizontal type button is also made of pure, gold-plated copper. It is located on the upper side and has been designed in a way that allows maximum durability and ease of disassembly.
Finally, the upper module allows vertical air supply to the atomizer and comprises an air regulator and a 0.5ml collector tank.
In its basic edition, it is offered with 18650 tube, a Vape2Safe, a practical carrying case, spare button spring and set of o-rings.
Height 100.4mm - Weight 110gr (22mm) and 135gr (23mm)
Power losses ~0.12V with Efest purple battery and 1.2ohm resistance
[Links nur für Registrierte]
€136.00
On the top side, the central divisible and movable pin is made of pure copper for maximum conductivity and is coated with appropriate materials in order to avoid the usual black spots at the contact points and the need for frequent cleaning. In particular, the pin’s upper side has been coated with rhodium (rhodium being four times harder than gold and with relatively good conductivity) to afford better resistance to wear from friction due to screwing the atomizer, while the bottom side of the pin is gold plated for maximum conductivity. Finally, it is made so that it allows easy movement to allow for plenty of “clean” contact spots until then next time it is cleaned.
The movable central pin, in conjunction with the vertical movement of the endless screw, will close the circuit providing electrical current for almost any battery/atomizer combination, doing away with the need for tedious micro-adjustments.
The horizontal type button is also made of pure, gold-plated copper. It is located on the upper side and has been designed in a way that allows maximum durability and ease of disassembly.
Finally, the upper module allows vertical air supply to the atomizer and comprises an air regulator and a 0.5ml collector tank.
In its basic edition, it is offered with 18650 tube, a Vape2Safe, a practical carrying case, spare button spring and set of o-rings.
Height 100.4mm - Weight 110gr (22mm) and 135gr (23mm)
Power losses ~0.12V with Efest purple battery and 1.2ohm resistance
[Links nur für Registrierte]
€136.00