TS-Grip von TS-Flipmods

    • TS-Grip von TS-Flipmods

      Es wurden eben die ersten Fotos des Prototyps auf FB gepostet - auch hübsch :)

      Today we are excited to introduce our new product line: The TS-Grip
      It is inspired by various well known mods and designs. All the product descriptions, booking lists, imported wood material, and etc will be announce soon!!!... P/S: Kindly take note that the pic shown is only a PROTOTYPE.
      The final product will be made from high grade quality materials. The rounded portion of the wood will be full half rounded and not with minor edges.
      For now, Let the pic speaks for itself!

      [Links nur für Registrierte]

      Edit: Das sind auch die Schöpfer der MessyBox (die habe ich auch, allerdings noch nie gedampft :) )
      Dateien
      • TS1.jpg

        (99,8 kB, 20 mal heruntergeladen, zuletzt: )
      • TS2.jpg

        (112,51 kB, 16 mal heruntergeladen, zuletzt: )
      • TS3.jpg

        (80,33 kB, 13 mal heruntergeladen, zuletzt: )
      • TS4.jpg

        (115,43 kB, 12 mal heruntergeladen, zuletzt: )
      • TS5.jpg

        (86,01 kB, 12 mal heruntergeladen, zuletzt: )
      • TS6.jpg

        (93,53 kB, 11 mal heruntergeladen, zuletzt: )
      • TS7.jpg

        (94,68 kB, 11 mal heruntergeladen, zuletzt: )
      • TS8.jpg

        (128,38 kB, 14 mal heruntergeladen, zuletzt: )
      [Links nur für Registrierte]

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Christian ()

    • UPDATE:

      Here are our latest update on our current progress:-
      THE PROGRESS:
      The detail machining on the woods and the 'C' SS frame will be completed this Friday. For the other SS parts such as the tubes, top cap, bottom cap, adjustable 510 pin and other small parts will be completed around next week that is between 1st Dec to 3rd Dec. During this coming weekend our main focus is to QC, refine, waxing, polishing every each single wood after machining.
      Our mod will not rely to much on hot glue as the pic depict the compartment for DNA chip, switches, and wires. This compartment is machined accurately and this effort takes time! Luckily we have started this the past one month.

      THE LIST:
      We will open our list next week but, we are still uncertain on the tentative date. We will update on the actual date 3 days before the list goes online. Our goal is once the payment is done within 24 hours, our final process will be DNA30D installation, final QC, wood minor waxing and TS-Grip packaging before delivery. This is to reduce the waiting time after payment.

      THE PRICE:
      The retail price will be 630USD including Paypal fee/excluding shipping cost. TS-Grip package will include 3 type of Slant Ring:
      24mm to 20mm(for Hellfire fan)
      24mm to 22mm(for any 22mm tanks)
      24 to 22mm with two slots(for Kayfun fan where the airhole are at the lower part of the tank)
      Dateien
      [Links nur für Registrierte]
    • Ok habs jetzt durchschaut. Kurze Zusammenfassung.

      Problem 1:
      Leute die Ihren Mod als Defekt zurück geschickt haben,
      bekamen die Aussage der Mod ist nicht defekt und wenn man Ihn zurück will muss nochmal der Versand bezahlt werden.

      Problem 2:
      Teilweise schlechte Qualität vor allem bei der Messybox.

      Problem 3:
      Ein Kunde der seinen Mod oder das Geld nicht zurück bekommt (selbst bei Abzug des Versands), sich das Geld nicht über PP holen kann und sein Dezember vertröstet wird.

      Problem 4:
      Diese Aussage von TS:
      You can have 2 choices. 1st we can send you back a unit then you can sell it mayb at a slightly lower from the price you buy. 2nd we can help you sell here in malaysia in a very very low price. I repeat very very low. Because vaping scene in malaysia ia now flood with hana mods clone. You just make your choice. Thank you'


      Problem 5:
      Das der Hersteller seine Geräte selber auf VA flippt.

      Alles in allem ein ziemlich negatives Bild.
      • Wer im Mittelpunkt steht, steht im Weg!
    • Hab heute einen ergattert, bevor ich mit ein paar Besitzern gesprochen habe...

      Es sind 2 Leute die man weiß die negativ gestimmt sind.

      Wenn ich Kunden habe, die sagen etwas ist kaputt, ich bekomme es teste es und es funktioniert... Wie handhabe ich dann einen Versand von 50€? Ich KANN es zahlen muss aber nicht, jeder wie er meint, das ist leider nach Malaysia nicht billig. Irgendwie verstehe ich ihn, verstehe aber auch den Kunden.

      Der erste Batch waren Natur Hölzer also keine "Stabilized Woods" in Malaysia ist eine andere Luftfeuchtigkeit als bei uns, was passiert mit Holz wenn es trocknet? Ja es schrumpft! Auch hier, kann man die Schuld beiden geben, dem Material oder dem Moder, egal. Er hat daraus gelernt! Der nächste Mod wird stabilized und Kunden können für 50% des Holzpreises ihr Holz tauschen lassen! Find eich fair.

      Dass er selber Flipped ist blöd... Ja er hat wenig Geld für den nächsten Patch, er hat in der Gruppe eine Nachricht dazu verfasst.
      Ich habe mit ihm auch geredet, durch den Holzfehler sind die Kosten explodiert, er will seinen nächsten Patch im März zu bauen, muss also alles bestellen, dafür braucht er Geld weil beim 1. Patch nichts übrig geblieben ist (Holztausch, Neuanschaffungen, viel Holz bei Produktion kaputt gegangen, usw.
      Ich denke ich hätte es auch getan an seiner Stelle.

      Also in meinen Augen wird hier aus einer Fliege ein Elefant gemacht!

      P.S.: Hab ich schon gesagt dass ich einen erstanden habe? *YIHAAA
      NO CLONE ZONE