[Links nur für Registrierte]
256 $
The HANA MODZ Pack V3 is a DNA 40 temperature protected device. The body is made of 6061 Billet Aluminum. Built in DNA charger; which is MICRO USB powered and provides a 500 milliamp charge current. The DNA 40 is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolv's patented Wattage Control, Temperature Protection, Preheat, Step up/Step Down Topology, Digital User Controls, OLED Screen, Onboard Buttons and Synchronous Rectification for maximum battery life and minimal heat generation. It is the most advanced personal vaporizer controller ever made.
Specifications Minimum Typical Max
Output Power 1 watt 40 watts
Output Voltage 1 volt 9.0 volts
Output Current, continuous 16.0 amps
Output Current, instantaneous peak .16 Ohm .7 Ohm 2.0 Ohms
Atomizer Resistance, temperature sensing wire, cold .10 Ohm .4 Ohm 1.0 Ohm
Temperature Limit 200 F 450 F 600 F
Input Voltage 3.1 volts 3.7 volts 4.3 volts
Input Current .5 amps 8.0 amps 16.0 amps
Screen On Current 25mA
Quiescent Current 1mA
Power Down Current 5uA
Efficiency 92%
Weight 6g
Footprint .65" x 1.30" .80" x 1.30"
Thickness .32"
Screen Size .69 OLED
Temperature Protection
The DNA 40 is the first power supply for electronic cigarettes to directly measure and limit the temperature of the heating coil during operations. By preventing the coil from becoming too hot regardless of fluid, wicking or airflow, a variety of undesirable situations can be prevented. For example, appropriate temperature settings will prevent the wicking material from charring, which compromises taste and introduces unintended chemicals into the vapor. Appropriate temperature setting will also reduce the breakdown of flavoring and base liquid components, which could impact taste or safety.
Evolv's Temperature Protection Technology requires a heating coil made from Nickel 200 alloy, rather than Nickel Chromium or Kanthal alloys. Nickel 200 is commercially pure nickel. It is often sold in vapor shops and online as "non-resistance wire". If the temperature reaches the maximum value, the wattage applied to the atomizer coil is reduced to prevent overheating. Please note that the temperature reading is the average temperature of the atomizer coil so that the temperature is uniform, without hot or cold spots. Ensure that the coil does not short to itself.
Because wattage, not temperature controls vapor volume, large vapor volumes can be produced without unnecessarily high temperatures. Temperature Protection is most helpful if the atomizer begins to dry out, the user pauses during a puff, the beginning or end of the puff, or if the wattage setting is inappropriate for the attached atomizer.
In normal operation, when the device is not firing the maximum temperature setting is displayed on the screen. When the device is firing, the actual average temperature of the coil is displayed on the screen.
256 $
The HANA MODZ Pack V3 is a DNA 40 temperature protected device. The body is made of 6061 Billet Aluminum. Built in DNA charger; which is MICRO USB powered and provides a 500 milliamp charge current. The DNA 40 is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolv's patented Wattage Control, Temperature Protection, Preheat, Step up/Step Down Topology, Digital User Controls, OLED Screen, Onboard Buttons and Synchronous Rectification for maximum battery life and minimal heat generation. It is the most advanced personal vaporizer controller ever made.
Specifications Minimum Typical Max
Output Power 1 watt 40 watts
Output Voltage 1 volt 9.0 volts
Output Current, continuous 16.0 amps
Output Current, instantaneous peak .16 Ohm .7 Ohm 2.0 Ohms
Atomizer Resistance, temperature sensing wire, cold .10 Ohm .4 Ohm 1.0 Ohm
Temperature Limit 200 F 450 F 600 F
Input Voltage 3.1 volts 3.7 volts 4.3 volts
Input Current .5 amps 8.0 amps 16.0 amps
Screen On Current 25mA
Quiescent Current 1mA
Power Down Current 5uA
Efficiency 92%
Weight 6g
Footprint .65" x 1.30" .80" x 1.30"
Thickness .32"
Screen Size .69 OLED
Temperature Protection
The DNA 40 is the first power supply for electronic cigarettes to directly measure and limit the temperature of the heating coil during operations. By preventing the coil from becoming too hot regardless of fluid, wicking or airflow, a variety of undesirable situations can be prevented. For example, appropriate temperature settings will prevent the wicking material from charring, which compromises taste and introduces unintended chemicals into the vapor. Appropriate temperature setting will also reduce the breakdown of flavoring and base liquid components, which could impact taste or safety.
Evolv's Temperature Protection Technology requires a heating coil made from Nickel 200 alloy, rather than Nickel Chromium or Kanthal alloys. Nickel 200 is commercially pure nickel. It is often sold in vapor shops and online as "non-resistance wire". If the temperature reaches the maximum value, the wattage applied to the atomizer coil is reduced to prevent overheating. Please note that the temperature reading is the average temperature of the atomizer coil so that the temperature is uniform, without hot or cold spots. Ensure that the coil does not short to itself.
Because wattage, not temperature controls vapor volume, large vapor volumes can be produced without unnecessarily high temperatures. Temperature Protection is most helpful if the atomizer begins to dry out, the user pauses during a puff, the beginning or end of the puff, or if the wattage setting is inappropriate for the attached atomizer.
In normal operation, when the device is not firing the maximum temperature setting is displayed on the screen. When the device is firing, the actual average temperature of the coil is displayed on the screen.
[Links nur für Registrierte]
