Hallo zusammen
Pre Order für den nachfolgend beschriebenen Verdampfer soll offenbar ab 20. Februar möglich sein. Preis: 47 £.
The Tobh Atty is made with the following:
• 303 stainless one-piece Body/ Negative Posts won't turn or move...ever
• Solid copper bottom contract
• Post holes are .05" (fifty thousandths) to easily accommodate a wide size range of kanthal wire sizes (28,26,24 22 etc.) or for easy quad coil builds.
• High strength PEEK top and bottom Center Post Insulator Rated for 480°F
• 18-8 stainless black oxidized Machine Screws
• Red Silicone O-rings Rated to +450°F
• 303 stainless sleeve with six 1/16 holes placed horizontally so as to create better distribution of air flow across the coils which, combined equate to three 1/8th inch holes
• Stainless finned Top-Cap with a conical internal design to decrease the occurance of turbulant air flow or low pressure/idle zones (Bernoulli's principle) Additionally the fins act as fully functional heat sinks which simultaneously disperse heat away from the coils and mouth piece
• Deep laser engraving on the sleeve and atty base that won't polish off.
Efficient three piece design with airflow control allowing easy access to drip directly on the coils while leaving airflow preferences undisturbed.
Active and functional Heat sink Top Cap allows heat generated from the coils to escape with ease, yielding a cooler vaping experience.
Features copper contacts, oxodized screws as well as medical-grade PEEK insulators allowing for high heat applications, like burning off or changing juices.
All components, including o-rings, are rated up to 480°F.
[hide]http://www.p-vaper.co.uk/epages/es152439.sf/en_GB/?ObjectPath=/Shops/es152439/Products/168%5B6%5D[/hide]
Pre Order für den nachfolgend beschriebenen Verdampfer soll offenbar ab 20. Februar möglich sein. Preis: 47 £.
The Tobh Atty is made with the following:
• 303 stainless one-piece Body/ Negative Posts won't turn or move...ever
• Solid copper bottom contract
• Post holes are .05" (fifty thousandths) to easily accommodate a wide size range of kanthal wire sizes (28,26,24 22 etc.) or for easy quad coil builds.
• High strength PEEK top and bottom Center Post Insulator Rated for 480°F
• 18-8 stainless black oxidized Machine Screws
• Red Silicone O-rings Rated to +450°F
• 303 stainless sleeve with six 1/16 holes placed horizontally so as to create better distribution of air flow across the coils which, combined equate to three 1/8th inch holes
• Stainless finned Top-Cap with a conical internal design to decrease the occurance of turbulant air flow or low pressure/idle zones (Bernoulli's principle) Additionally the fins act as fully functional heat sinks which simultaneously disperse heat away from the coils and mouth piece
• Deep laser engraving on the sleeve and atty base that won't polish off.
Efficient three piece design with airflow control allowing easy access to drip directly on the coils while leaving airflow preferences undisturbed.
Active and functional Heat sink Top Cap allows heat generated from the coils to escape with ease, yielding a cooler vaping experience.
Features copper contacts, oxodized screws as well as medical-grade PEEK insulators allowing for high heat applications, like burning off or changing juices.
All components, including o-rings, are rated up to 480°F.
[hide]http://www.p-vaper.co.uk/epages/es152439.sf/en_GB/?ObjectPath=/Shops/es152439/Products/168%5B6%5D[/hide]
[Links nur für Registrierte]