MMVapors - Kainos 26650/18650.

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • MMVapors - Kainos 26650/18650.

      – 60 Watt SX350 chip
      – Regulates down BELOW battery voltage.. down to 1.5V!!!
      – handles 0.2 ohm – 3.0 ohm Atomizers
      – Handcrafted
      – Gravity Sensor
      – Only one button!
      – Screw-less Magnetic Battery lid
      – Spring Loaded 510 connection
      – 1×18650 /26650 battery

      – Dimensions: 97x36x47mm /18650
      – Dimensions: 97x42x53mm /26650

      – Materials: Mahogany + SS
      – 5W – 60W Variable Wattage
      – 1.5V – 9.5V Variable Voltage
      – By-pass (direct connection) mode
      – 0.66” OLED Screen
      – Front USB charging port with light indicator



      [Links nur für Registrierte]
      € 225.00
    • MMVapors - Customized Options for Kainos 26650/18650.

      Stabilized wood for Kainos

      In order to get a Kainos 26650 in stabilized wood you will need to do the following:
      Make an order for a regular Kainos 26650
      Send us a block of stabilized wood of your choice with the minimum dimensions:
      3.94 x 1.82 x 2.25 inches (100 x 46 x 57 mm)
      Send an email to customized@mmvapors.com stating the order number and the fact that you are sending us the wood + the tracking number of that package.


      In order to get a Kainos 18650 in stabilized wood you will need to do the following:
      Make an order for a regular Kainos 18650
      Send us a block of stabilized wood of your choice with the minimum dimensions:
      3.94 x 1.58 x 1.97 inches (100 x 40 x 50 mm)
      Send an email to customized@mmvapors.com stating the order number and the fact that you are sending us the wood + the tracking number of that package.



      Engraving – battery lid

      You have the option to get an additional battery lid, so you can have one lid with engraving and one blank battery lid, the cost for the additional battery lid is 12 euro.

      For Engraving on the battery lid we offer 2 kinds of engraving:

      Rotary engraving (deep cuts)
      Complex design (image)
      Send us an image of your choice (no trademarks, unless you have permission of the trademark holder, in that case you will need to send us proof of that permission)
      The Rotary engraving cost depends on the complexity of the design and is calculated on the time it takes to make the engraving. A price quote will be send after we examine the design.
      Name Engraving only
      We offer name engraving only for 15 euro up to 20 characters (only text no graphics, in a font of your choice)

      Laser engraving

      The Laser engraving is 30 euro per design regardless of the complexity of the design


      Engraving - wood

      The wooden sides of the Kainos can also be engraved. Here the only option we have at the moment is laser engraving. The cost for laser engraving on the wood is 20 euro per side regardless of complexity of the design.
      [Links nur für Registrierte]