Salamander RBA is a high quality bottom coil rebuildable atomizer.
Material: 303 Stainless Steel with Polycarbonate tube
Capacity: 5 ml
Height: 40 mm (not including 510 connector)
Posts Height: 6.5 mm
Distance Between Posts: 8.5 mm
Airflow Tube Height: 3.5 mm
Chimney Inside Diameter: 4.6 mm
– Intermediate liquid chamber that eliminates the need to adjust the liquid flow depends to liquid volume and guarantees the constant liquid flow on any usage style;
– The chimney is wide enough (4.6 mm) to keep vapor hot;
– Airflow control ring with three holes;
– Convenient filling through the inner bottom tray using nozzle;
– Possibility to set up the coil without complete disassemble emptying from e-liquid;
– The compact size: 40 mm height for 5 ml capacity;
– The polycarbonate tube (without threads that are limiting) is covered with the stainless steel shield with helix-form windows.
If You prefer to put wick tails outside the vaporizing chamber, You can turn coil by 90 degrees, so these tails will be directly against the cuts.
SALAMANDER RBA – FIRST BATCH PRE-ORDER
Registration and payment: December 20. 2014 – December 31. 2014
Manufacturing start: 1 January 2015
shipping: first week of February 2015
The stock is limited. Pre-order will end when the planned quantity will be reached .
[Links nur für Registrierte]
Material: 303 Stainless Steel with Polycarbonate tube
Capacity: 5 ml
Height: 40 mm (not including 510 connector)
Posts Height: 6.5 mm
Distance Between Posts: 8.5 mm
Airflow Tube Height: 3.5 mm
Chimney Inside Diameter: 4.6 mm
– Intermediate liquid chamber that eliminates the need to adjust the liquid flow depends to liquid volume and guarantees the constant liquid flow on any usage style;
– The chimney is wide enough (4.6 mm) to keep vapor hot;
– Airflow control ring with three holes;
– Convenient filling through the inner bottom tray using nozzle;
– Possibility to set up the coil without complete disassemble emptying from e-liquid;
– The compact size: 40 mm height for 5 ml capacity;
– The polycarbonate tube (without threads that are limiting) is covered with the stainless steel shield with helix-form windows.
If You prefer to put wick tails outside the vaporizing chamber, You can turn coil by 90 degrees, so these tails will be directly against the cuts.
SALAMANDER RBA – FIRST BATCH PRE-ORDER
Registration and payment: December 20. 2014 – December 31. 2014
Manufacturing start: 1 January 2015
shipping: first week of February 2015
The stock is limited. Pre-order will end when the planned quantity will be reached .
[Links nur für Registrierte]