disarstars Blog 16

Artikel mit dem Tag „Dripper“

Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

  • Mini Yaeliq RDA

    disarstar - Hardwarevorstellung

    Mini Yaeliq RDA• MiniYaeliq Rebuildable Atomizer :

    Technical details :

    • Single easy build coil.
    • Dual air holes.
    • Removable top cap.
    • Can hold 1.3-1.5ml in reservoir with enough cotton.
    • No leakages even when it upside down.
    • 16 mm.
    • 303 food grade Stainless Steel construction.
    • The rda is full stainless.





    Das ist ein kleiner zum Glück eher unbekannter 16mm Dripper aus Israel. Preis ist 79 $ .
    Die Luftführung ist toll gelöst über 2 Luftlöcher in der Seite der Base in 2 hochstehende unter der Wicklung liegende Strömungsöffnungen. Grundsolide aufgebaut. Sehr einfach innerhalb von Sekunden zu wickeln.
    Ganz überragender Geschmack. Ich habe gerade sehr viel Spass damit. :bigsmile:
    [Links nur für Registrierte]
    Diskussion unter: [Links nur für Registrierte] [Weiterlesen]

  • Golden Greek - The Tilemahos RBA Tank Dripper.

    disarstar - Hardwarevorstellung

    21mm
    2-post
    Bottom draw forces airflow directly up through coil from below.
    Easily adjust juice flow by turning mouthpiece.
    Biult in Air-Control (optional)
    Easy top-fill ring.
    2 finishes available: Polished or Matte(brushed)

    2 different bases available:
    Standard 510
    OR
    510 with built in air control ring

    This atomizer is amazing! Elegance meets performance with the Tilemahos. It is a perfect match when paired with a GG Esterigon.






    [Links nur für Registrierte]
    [Links nur für Registrierte]



    Diskussion unter: ​[Links nur für Registrierte] [Weiterlesen]

  • Foggatti Switchblade Hybrid Dripper.

    disarstar - Hardwarevorstellung

    The foggatti spitfire/hybrid combo is TINY especially in 18350 config.
    It comes both 510 ready & hybrid ready just like the T22 so existing hybrid owners can add the 'Spitfire' to their hybrid.
    We also have different size tubes (vapist edition) in stock now.

    Vapist.net dripping through the oval tip is simple and the new oval tip feels great! juice then trikkles down to feed upto 3 coils





    Also the first of a few new projects from Foggatti are expected by the weekend. The Dripper Codename; Spitfire will be added to the site and again some units will be available at UK Vapefest. Hopefully I can unveil the second project at Vapefest too :)
    [Links nur für Registrierte]
    Diskussion unter: ​[Links nur für Registrierte] [Weiterlesen]

  • Dripper by Senio

    disarstar - Hardwarevorstellung





    Fully Hand Made, rebuildable dripping atomiser. Produced with special attention to details.

    Unique, clean and classy design;
    Small power loss;
    Adjustable center pin;
    Hybrid 20x1 connection for such mods as Caravela, GP Paps, GUS, and many others;
    Safe - Only FDA Approved materials;
    Provide great eLiquid taste, strong throat hit and plently of vapour!;
    Produced with custom requests;
    Really small and lightweight!




    Air Holes in SS caps are 1.2mm (or bigger), because a lot of ppl changed mind and took Mixed instead of SS (which were already made for them)
    Material: Stainless Steel / Brass (depends on request);
    Diameter: 22mm;
    Size: ~22mm (without 20x1 connector and drip-tip);
    Finish: Satine / Brushed;
    Top cap shape: Flat / Slant (For SS cap only) / Rounded (For SS cap only);
    Connection: Hybrid 20x1;
    Tank material: - ;
    Tank size (OD/length/WT): - ;
    Tank capacity: ~0,30ml;
    … [Weiterlesen]

  • TOBH ATTY

    disarstar - Hardwarevorstellung

    TOBH ATTY

    Durchmesser: 22mm

    Product Description:
    -303 stainless steel one-piece Body/ Negative Posts won't turn or move...ever
    -Solid copper bottom contact
    -Post holes are .05" (fifty thousandths big) to easily accommodate a wide size range of kanthal wire sizes (28,26,24 etc.) and for easy quad coil or cotton builds.
    -High strength PEEK insulators for the Center Post which are Rated for 480°F and won't melt like Delrin.
    -18-8 stainless black oxidized coated Machine Screws
    -Black Buna-N O-rings Rated to +280°F
    -303 stainless steel sleeve with SIX 1/16 inch holes placed horizontally so as to create better distribution of air flow across the coils which, combined equate to three 1/8th inch holes! no need to drill.
    -Stainless finned Top-Cap with a conical internal design to channel flavor while decreasing the occurance of turbulant air or low pressure/idle zones in
    the chamber (Bernoulli's principle) Additionally the fins act as fully functional heat sinks which
    … [Weiterlesen]

  • Omega Rebuildable Atomizer

    disarstar - Hardwarevorstellung




    Adjustable Airflow (3mm hole, twist to adjust size)
    Single or Dual Coil Configuration (3 holes in cap)
    22mm Diameter ( fits flush on most mods )
    Stainless Steel
    Laser Engravings
    Delrin insulator
    Made in the USA

    Dual coil build video [Links nur für Registrierte]
    Single coil build video [Links nur für Registrierte]

    You can also buy the Omega off [Links nur für Registrierte] . $85 for RDA . Designed by Steve Nguyen of [Links nur für Registrierte]


    Diskussionsbeitrag unter: ​[Links nur für Registrierte] [Weiterlesen]

  • Nimbus Dripper

    disarstar - Hardwarevorstellung

    [Links nur für Registrierte]

    NIMBUS Features
    The "Spit Back Protection" does the following: as the name suggests, it protects you from the irritating spitbacks you get when your dripper gets "flooded" by your ejuice. it also serves as a "Flavor Booster" because of the hole size inside the driptip hole. It concentrates the vapor from the wick to your taste buds or mouth so that you taste your juice better.
    NIMBUS is the ONLY Filipino Made Atomizer that has a Spit Back protection
    The NIMBUS Atomizer has TWO insulators (another first here in the Philippines). The one on top is a soft insulator, this one serves as a warning about how you treat your NIMBUS, if it gets bloated you're it means you're torching your NIMBUS directly straight into the insulator(i know it sounds stupid, but a lot of people to this.) The other insulator on the bottom part is made of PA66 it's high heat resistance and placement makes it near impossible to destroy (not unless you're really trying to
    … [Weiterlesen]